HOW TO MAKE A DRONE (QUADCOPTER)

Hello friends!!

Welcome to TECH STUDIO.

Today we discuss about a how to make a Drone (Quadcopter) using kk 2.1.5 Board

Get it on YouTube NoW!


TO make this we need:

1. Drone Frame

2. 4x BLDC Motor
3. 4x 30A ESC
4. 4x Blade
5. 2200 mah Lipo Battery
6. Transmitter & Receiver
7. KK 2.1.5 Board

About the components:

1. Drone Frame : A drone frame is a special frame with large cells embossed on a plastic foundation.

2. BLDC Motor :A brushless DC electric motor (BLDC motor or BL motor), also known as electronically commutated motor (ECM or EC motor) and synchronous DC motors, are synchronous motors powered by direct current (DC) electricity via an inverter or switching power supply which produces electricity in the form of alternating current (AC) to drive each phase of the motor via a closed loop controller.

3. 30A ESC : An electronic speed control or ESC is an electronic circuit that controls and regulates the speed of an electric motor. It may also provide reversing of the motor and dynamic braking. Miniature electronic speed controls are used in electrically powered radio controlled models. Full-size electric vehicles also have systems to control the speed of their drive motors.

4. Lipo Battery : A lithium polymer battery, or more correctly lithium-ion polymer battery (abbreviated as LiPo, LIP, Li-poly, lithium-poly and others), is a rechargeable battery of lithium-ion technology using a polymer electrolyte instead of a liquid electrolyte.

 

5. Transmitter & Receiver : In electronics and telecommunications a transmitter or radio transmitter is an electronic device which produces radio waves with an antenna. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiates radio waves. 

To get the live demonstration see the videos.

1.DRONE : HOW TO MAKE A DRONE ( QUADCOPTER ) USING KK 2.1.5 BOARD PART - 1 (https://youtu.be/0W7DmxxRWTU)

2.DRONE : HOW TO MAKE A DRONE ( QUADCOPTER ) USING KK 2.1.5 BOARD PART – 2 (https://youtu.be/RKljuDdxZjw)

3.DRONE : HOME MADE DRONE ( QUADCOPTER ) FLYING TEST (https://youtu.be/SB4_syTMP9Q)

4.DRONE : FULL SETUP OF KK 2.1.5 BOARD || SET UP FLIGHT CONTROLLER OF A DRONE (https://youtu.be/P7QgWcerD3Q)

Set up And Assembling : Firstly setup the frame of the drone and then fix the BLDC motor on the drone. Then connect the ESC to pdp. Also connect the battery connector XT60 to the pdp. After it connect the motors and esc. Now place the flight controller kk 2.1.5 in the middle of the drone and place the receiver on the left side of the drone. Make the connections of kk board and receiver. After every thing setup your kk 2.1.5 board.