 |
| led cube |
 |
| circuit |
 |
| led |
 |
| led 1 |
 |
| led cube 2 |
 |
| led cube 3 |
Hello friends!!
Welcome to TECH STUDIO.
Today we discuss about a 5x5x5 Led Cube Using Arduino.
Welcome to TECH STUDIO.
Today we discuss about a 5x5x5 Led Cube Using Arduino.
TO make this we need:
1. Arduino UNO
2. 125x LED
3. Jumper Wire
About the components:
1. Arduino UNO: This is a micro controller. It has the ATmega328p ic. Mainly C programming are used to control the arduino. To connect it with your computer it has Arduino IDE software.
2. LED : LED stands for Light Emitting Diode. It is a semiconductor light source that emits light when current flows through it.
Content:
- Firstly we have to make a layer of 25 LEDs.
- We have to design the layer just like a matrix in which there are 5 rows and 5 column. So we get the layer of 25 LEDs.
- In the similar way we have to make another 4 layers.
- So ultimately we get 5 layers.
- Now we have to place the layer one by one.
- Two consecutive layers must be separated by a distance.
- In this way we get a structure of cube which consists of 125 LEDs.
To get the live demonstration see the video.
You can get the video link here -- https://youtu.be/xTBQFnKYVHY
Hope You will enjoy this video.
In the second part we will discuss about the circuit diagram and code.
You can get the second part here:
https://techstudio9663.blogspot.com/2019/07/how-to-make-led-cube-5x5x5-using_3.html
